Tile Glue

How to use tile adhesive:
1. Keep the veneer surface clean and tidy. At the same time, if there are curing agents and release agents on the base surface, they must be roughened before construction.
2. Mix tile glue and water in a ratio of 4:1, and then pour it into the "mixing bucket". Make sure there are no particles or sediment after stirring until the cake is in the shape of a paste and it is slightly dry before you can start using it.
3. Before starting to lay the tiles, wipe off the dust on the back of the tiles and clean them up. Use a professional "toothed scraper" to evenly scrape the tile glue onto the base surface. Also note that the construction surface for each scraping is about 1 square meter. about.
4. After the tile glue is evenly applied to the base surface and the back of the ceramic tile, press the tiles onto the base surface with your hands, or use a glue hammer to tap lightly to adjust the flatness of the tiles.
5. After the above construction steps are completed, the final cleaning work can be carried out. After 24 hours, subsequent seaming work can be carried out.